Royal Cooking Equipment

37 products ready for review · Pricing pending

Review product features, specifications and available documents below. Additional completed products will appear here as this draft is updated.

Royal RR-4 24″ Four-Burner Gas Range

Royal RR-4 24″ Four-Burner Gas Range

Pricing pending

View features, specifications & documents

Royal RR-4 24″ Four-Burner Gas Range is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel front, sides, landing ledge, back guard, shelf, valve cover and kick plate
  • Porcelain finish on contact surfaces
  • Standing pilot with 100% safety shut down
  • “U” Stainless Steel Burner rated at 27,000 BTU/hr.
  • 2 piece lift off cast iron burner rated at 30,000 BTU/hr.
  • 12″ x 12″ cast iron grate with double angled slope for efficient heating

Technical Specifications

Brand Royal
Model RR-4
Width 24 in
Open burners 4
Total input 147,000 BTU/hr
Oven burner 27,000 BTU/hr
Shipping weight 400 lb
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal RR-6 36″ Six-Burner Gas Range

Royal RR-6 36″ Six-Burner Gas Range

Pricing pending

View features, specifications & documents

Royal RR-6 36″ Six-Burner Gas Range is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel front, sides, landing ledge, back guard, shelf, valve cover and kick plate
  • Porcelain finish on contact surfaces
  • Standing pilot with 100% safety shut down
  • “U” Stainless Steel Burner rated at 35,000 BTU/hr.
  • 2 piece lift off cast iron burner rated at 30,000 BTU/hr.
  • 12″ x 12″ cast iron grate with double angled slope for efficient heating

Technical Specifications

Brand Royal
Model RR-6
Width 36 in
Open burners 6
Total input 215,000 BTU/hr
Oven burner 35,000 BTU/hr
Shipping weight 600 lb
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal RMG-36 36″ Manual Gas Griddle

Royal RMG-36 36″ Manual Gas Griddle

Pricing pending

View features, specifications & documents

Royal RMG-36 36″ Manual Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel sides, front valve cover and ledge
  • 11” high, low profile
  • ”U” shaped stainless steel burner every 12” rated at 30,000 BTU/hr.
  • Stainless steel tubing for pilots
  • 3/4” thick griddle plate with polished cooking surface
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Large 1-½ gallon capacity stainless steel grease can

Technical Specifications

Brand Royal
Model RMG-36
Width 36 in
Burners 3
Total input 90,000 BTU/hr
Plate thickness 3/4 in
Listed weight 290 lb
Cooking depth 24 in
Included legs 4-inch adjustable legs
Shipping weight 290 lb

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal RTG-36 36″ Thermostatic Gas Griddle

Royal RTG-36 36″ Thermostatic Gas Griddle

Pricing pending

View features, specifications & documents

Royal RTG-36 36″ Thermostatic Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 24” cooking depth
  • 11” high, Low Profile
  • Large 1½ gallon capacity S/S grease can
  • Compact heavy gauge chassis for long life
  • Stainless steel sides and front valve cover
  • Double wall panels for cooler sides
  • Aeration panels between the burners for added efficiency
  • Stainless Steel “U” shaped burner every 12”, rated at 30,000 BTU/hr
  • Energy saving thermostat is adjustable from 150º-450º F
  • 1” thick griddle plate with polished cooking surface
  • Thermo control to operate every burner
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RTG-36
Width 36 in
Burners / thermostats 3 / 3
Total input 90,000 BTU/hr
Plate thickness 1 in
Listed weight 360 lb
Cooking depth 24 in
Temperature range 150–450°F
Included legs 4-inch adjustable legs

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal RRB-36 36″ Radiant Gas Charbroiler

Royal RRB-36 36″ Radiant Gas Charbroiler

Pricing pending

View features, specifications & documents

Royal RRB-36 36″ Radiant Gas Charbroiler is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 11” high, Low Profile F
  • Easily removable and replaceable independent D firebox assembly R
  • Full width, removable stainless steel crumb S pan under the broiler for easy cleaning S
  • Heavy duty cast iron radiant covers
  • Compact heavy gauge chassis for long life
  • Stainless steel sides, front valve cover and ledge
  • Double wall panels for cooler sides
  • All welded fire box supports heavy duty radi- ant covers
  • Stainless steel tubular burners rated at 15,000 BTU/hr each
  • Individually adjustable burners provide power- ful radiant heat
  • Standing pilots for instant ignition
  • Heavy duty cast iron top grates
  • Stainless steel tubing for pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RRB-36
Width 36 in
Depth 30-1/2 in
Burners 6
Total input 90,000 BTU/hr
Shipping weight 383 lb
Included legs 4-inch adjustable legs

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal RHP-36-6 36″ Six-Burner Gas Hot Plate

Royal RHP-36-6 36″ Six-Burner Gas Hot Plate

Pricing pending

View features, specifications & documents

Royal RHP-36-6 36″ Six-Burner Gas Hot Plate is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Removable cast iron burners and 12-inch square cooking grates.
  • Protected standing pilots.
  • Stainless steel front and sides with removable crumb pan.

Technical Specifications

Brand Royal
Model RHP-36-6
Width 36 in
Depth 30-1/2 in
Burners 6
Total input 180,000 BTU/hr
Shipping weight 215 lb
Included legs 4-inch adjustable legs

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal RHEF-45-CM 45–50 lb High-Efficiency Gas Fryer

Royal RHEF-45-CM 45–50 lb High-Efficiency Gas Fryer

Pricing pending

View features, specifications & documents

Royal RHEF-45-CM 45–50 lb High-Efficiency Gas Fryer is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 63% Energy Efficiency
  • “Zero” Recovery time
  • 71 lbs. Per hour production capacity
  • 45-50 lb capacity stainless steel tank assembly
  • All stainless steel cabinet
  • Innovative heat exchanger assembly transfers maximum heat to the oil
  • 3 tube heat entry with easily removable diffusers reduces thermal stress
  • Automatic pilot ignition with 100% safety
  • High efficiency in-shot burners rated at 33,000 BTU/hr each
  • Extremely low exhaust flue temperatures
  • Twin fry baskets with plastic coated handles for ease of handling
  • 1¼” full port drain valve
  • 6” heavy duty adjustable legs
  • Ten year limited (prorated) warranty on S/S tank

Technical Specifications

Brand Royal
Model RHEF-45-CM
Oil capacity 45 lb
Width 15 in
Depth 33-1/2 in
Burners 3
Total input 99,000 BTU/hr
Electrical requirements 120 V / 60 Hz / 1 phase / 2 A
Shipping weight 240 lb
Tank warranty 10-year limited prorated; manufacturer terms apply

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts and labor coverage, subject to the manufacturer’s installation, service and exclusion requirements. Stainless steel fry tank: ten years, prorated. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal RCOS-1 Single-Deck Gas Convection Oven

Royal RCOS-1 Single-Deck Gas Convection Oven

Pricing pending

View features, specifications & documents

Royal RCOS-1 Single-Deck Gas Convection Oven is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • All stainless steel front, sides and top construction
  • Two stainless steel, 35,000 BTU/hr. burners
  • Electronic ignition with 100% safety
  • Electric thermostat adjustable from 150° -500° F
  • Oven interior is porcelain coated for easy cleaning
  • 5 chrome-plated racks standard with 11 positions
  • Two speed motor

Technical Specifications

Brand Royal
Model RCOS-1
Width 38 in
Depth 40-1/2 in
Total input 70,000 BTU/hr
Temperature range 150–500°F
Configuration Standard depth / single deck
Electrical requirements 120 VAC / 50–60 Hz / 1 phase / 8 A
Usable interior (W × D × H) 29 × 22½ × 24 in
Shipping weight 520 lb
Electrical supply 120VAC, 50–60 Hz, 1 phase, 8 A; see installation guide

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal RECO-1 Single-Deck Electric Convection Oven

Royal RECO-1 Single-Deck Electric Convection Oven

Pricing pending

View features, specifications & documents

Royal RECO-1 Single-Deck Electric Convection Oven is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • All stainless steel front, sides, and top construction
  • 3 heating elements for a total of 9 KW power (RECO Models Only)
  • Electric thermostat adjustable from 150° to 500° F
  • Oven interior is porcelain coated for easy cleaning
  • 5 chrome-plated racks standard with 11 positions
  • Two speed motor

Technical Specifications

Brand Royal
Model RECO-1
Width 34 in
Depth 40-1/2 in
Power 9 kW
Voltage 208/240 V
Temperature range 150–500°F
Voltage / phase choices 208 or 240 V; single or three phase; 480 V three-phase optional
Usable interior (W × D × H) 29 × 22½ × 24 in
Shipping weight 495 lb

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Royal RFT-DS Fryer Drain Station

Royal RFT-DS Fryer Drain Station

Pricing pending

View features, specifications & documents

Royal RFT-DS Fryer Drain Station is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • High quality heavy gauge Stainless Steel tank
  • Ship weight 130 lbs
  • 30-1/2″ deep
  • 15-1/2″ wide

Technical Specifications

Brand Royal
Model RFT-DS
Width 15½ in
Depth 30½ in
Shipping weight 130 lb
Options Casters and heat lamp shown by manufacturer are optional

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: one year of parts and labor coverage, subject to the manufacturer’s installation, service and exclusion requirements. Stainless steel fry tank: five years, prorated. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Royal BG-2424 BROILER-THERMO GRIDDLE COMBINATION BG Series

Royal BG-2424 BROILER-THERMO GRIDDLE COMBINATION BG Series

Pricing pending

View features, specifications & documents

Royal BG-2424 BROILER-THERMO GRIDDLE COMBINATION BG Series is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 1,200°F mineral wool insulation
  • Stainless steel drip tray/grease can
  • Stainless steel sides and front valve cover
  • 4” high adjustable heavy duty legs included
  • Easily removable and replaceable independent
  • Heavy cast iron burners rated at 11,000 BTU/hr
  • Heavy cast iron radiants
  • Cast iron top grates
  • Special steel tubular burner rated at 12,000
  • 1” thick griddle plate with polished cooking
  • Energy saving thermostat is adjustable from

Technical Specifications

Brand Royal
Model BG-2424
BTU 106,000
BROILER 24″
GRIDDLE 24″
WIDTH 48″
WEIGHT 460 lbs.

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Manufacturer family photo shows RMG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RMG-12 12″ Manual Gas Griddle

Pricing pending

View features, specifications & documents

Royal RMG-12 12″ Manual Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel sides, front valve cover and ledge
  • 11” high, low profile
  • ”U” shaped stainless steel burner every 12” rated at 30,000 BTU/hr.
  • Stainless steel tubing for pilots
  • 3/4” thick griddle plate with polished cooking surface
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Large 1-½ gallon capacity stainless steel grease can

Technical Specifications

Brand Royal
Model RMG-12
Width 12 in
Cooking depth 24 in
Burners 1
Total input 30,000 BTU/hr
Plate thickness ¾ in
Shipping weight 140 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RMG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RMG-18 18″ Manual Gas Griddle

Pricing pending

View features, specifications & documents

Royal RMG-18 18″ Manual Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel sides, front valve cover and ledge
  • 11” high, low profile
  • ”U” shaped stainless steel burner every 12” rated at 30,000 BTU/hr.
  • Stainless steel tubing for pilots
  • 3/4” thick griddle plate with polished cooking surface
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Large 1-½ gallon capacity stainless steel grease can

Technical Specifications

Brand Royal
Model RMG-18
Width 18 in
Cooking depth 24 in
Burners 1
Total input 30,000 BTU/hr
Plate thickness ¾ in
Shipping weight 165 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RMG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RMG-24 24″ Manual Gas Griddle

Pricing pending

View features, specifications & documents

Royal RMG-24 24″ Manual Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel sides, front valve cover and ledge
  • 11” high, low profile
  • ”U” shaped stainless steel burner every 12” rated at 30,000 BTU/hr.
  • Stainless steel tubing for pilots
  • 3/4” thick griddle plate with polished cooking surface
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Large 1-½ gallon capacity stainless steel grease can

Technical Specifications

Brand Royal
Model RMG-24
Width 24 in
Cooking depth 24 in
Burners 2
Total input 60,000 BTU/hr
Plate thickness ¾ in
Shipping weight 210 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RMG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RMG-48 48″ Manual Gas Griddle

Pricing pending

View features, specifications & documents

Royal RMG-48 48″ Manual Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel sides, front valve cover and ledge
  • 11” high, low profile
  • ”U” shaped stainless steel burner every 12” rated at 30,000 BTU/hr.
  • Stainless steel tubing for pilots
  • 3/4” thick griddle plate with polished cooking surface
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Large 1-½ gallon capacity stainless steel grease can

Technical Specifications

Brand Royal
Model RMG-48
Width 48 in
Cooking depth 24 in
Burners 4
Total input 120,000 BTU/hr
Plate thickness ¾ in
Shipping weight 390 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RMG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RMG-60 60″ Manual Gas Griddle

Pricing pending

View features, specifications & documents

Royal RMG-60 60″ Manual Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel sides, front valve cover and ledge
  • 11” high, low profile
  • ”U” shaped stainless steel burner every 12” rated at 30,000 BTU/hr.
  • Stainless steel tubing for pilots
  • 3/4” thick griddle plate with polished cooking surface
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Large 1-½ gallon capacity stainless steel grease can

Technical Specifications

Brand Royal
Model RMG-60
Width 60 in
Cooking depth 24 in
Burners 5
Total input 150,000 BTU/hr
Plate thickness ¾ in
Shipping weight 485 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RMG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RMG-72 72″ Manual Gas Griddle

Pricing pending

View features, specifications & documents

Royal RMG-72 72″ Manual Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Stainless steel sides, front valve cover and ledge
  • 11” high, low profile
  • ”U” shaped stainless steel burner every 12” rated at 30,000 BTU/hr.
  • Stainless steel tubing for pilots
  • 3/4” thick griddle plate with polished cooking surface
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Large 1-½ gallon capacity stainless steel grease can

Technical Specifications

Brand Royal
Model RMG-72
Width 72 in
Cooking depth 24 in
Burners 6
Total input 180,000 BTU/hr
Plate thickness ¾ in
Shipping weight 580 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RTG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RTG-12 12″ Thermostatic Gas Griddle

Pricing pending

View features, specifications & documents

Royal RTG-12 12″ Thermostatic Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 24” cooking depth
  • 11” high, Low Profile
  • Large 1½ gallon capacity S/S grease can
  • Compact heavy gauge chassis for long life
  • Stainless steel sides and front valve cover
  • Double wall panels for cooler sides
  • Aeration panels between the burners for added efficiency
  • Stainless Steel “U” shaped burner every 12”, rated at 30,000 BTU/hr
  • Energy saving thermostat is adjustable from 150º-450º F
  • 1” thick griddle plate with polished cooking surface
  • Thermo control to operate every burner
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RTG-12
Width 12 in
Cooking depth 24 in
Burners 1
Total input 30,000 BTU/hr
Plate thickness 1 in
Shipping weight 145 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer
Thermostats 1
Temperature range 150–450°F

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RTG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RTG-18 18″ Thermostatic Gas Griddle

Pricing pending

View features, specifications & documents

Royal RTG-18 18″ Thermostatic Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 24” cooking depth
  • 11” high, Low Profile
  • Large 1½ gallon capacity S/S grease can
  • Compact heavy gauge chassis for long life
  • Stainless steel sides and front valve cover
  • Double wall panels for cooler sides
  • Aeration panels between the burners for added efficiency
  • Stainless Steel “U” shaped burner every 12”, rated at 30,000 BTU/hr
  • Energy saving thermostat is adjustable from 150º-450º F
  • 1” thick griddle plate with polished cooking surface
  • Thermo control to operate every burner
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RTG-18
Width 18 in
Cooking depth 24 in
Burners 1
Total input 30,000 BTU/hr
Plate thickness 1 in
Shipping weight 185 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer
Thermostats 1
Temperature range 150–450°F

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RTG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RTG-24 24″ Thermostatic Gas Griddle

Pricing pending

View features, specifications & documents

Royal RTG-24 24″ Thermostatic Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 24” cooking depth
  • 11” high, Low Profile
  • Large 1½ gallon capacity S/S grease can
  • Compact heavy gauge chassis for long life
  • Stainless steel sides and front valve cover
  • Double wall panels for cooler sides
  • Aeration panels between the burners for added efficiency
  • Stainless Steel “U” shaped burner every 12”, rated at 30,000 BTU/hr
  • Energy saving thermostat is adjustable from 150º-450º F
  • 1” thick griddle plate with polished cooking surface
  • Thermo control to operate every burner
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RTG-24
Width 24 in
Cooking depth 24 in
Burners 2
Total input 60,000 BTU/hr
Plate thickness 1 in
Shipping weight 250 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer
Thermostats 2
Temperature range 150–450°F

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RTG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RTG-48 48″ Thermostatic Gas Griddle

Pricing pending

View features, specifications & documents

Royal RTG-48 48″ Thermostatic Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 24” cooking depth
  • 11” high, Low Profile
  • Large 1½ gallon capacity S/S grease can
  • Compact heavy gauge chassis for long life
  • Stainless steel sides and front valve cover
  • Double wall panels for cooler sides
  • Aeration panels between the burners for added efficiency
  • Stainless Steel “U” shaped burner every 12”, rated at 30,000 BTU/hr
  • Energy saving thermostat is adjustable from 150º-450º F
  • 1” thick griddle plate with polished cooking surface
  • Thermo control to operate every burner
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RTG-48
Width 48 in
Cooking depth 24 in
Burners 4
Total input 120,000 BTU/hr
Plate thickness 1 in
Shipping weight 475 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer
Thermostats 4
Temperature range 150–450°F

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RTG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RTG-60 60″ Thermostatic Gas Griddle

Pricing pending

View features, specifications & documents

Royal RTG-60 60″ Thermostatic Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 24” cooking depth
  • 11” high, Low Profile
  • Large 1½ gallon capacity S/S grease can
  • Compact heavy gauge chassis for long life
  • Stainless steel sides and front valve cover
  • Double wall panels for cooler sides
  • Aeration panels between the burners for added efficiency
  • Stainless Steel “U” shaped burner every 12”, rated at 30,000 BTU/hr
  • Energy saving thermostat is adjustable from 150º-450º F
  • 1” thick griddle plate with polished cooking surface
  • Thermo control to operate every burner
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RTG-60
Width 60 in
Cooking depth 24 in
Burners 5
Total input 150,000 BTU/hr
Plate thickness 1 in
Shipping weight 590 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer
Thermostats 5
Temperature range 150–450°F

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RTG-36; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RTG-72 72″ Thermostatic Gas Griddle

Pricing pending

View features, specifications & documents

Royal RTG-72 72″ Thermostatic Gas Griddle is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 24” cooking depth
  • 11” high, Low Profile
  • Large 1½ gallon capacity S/S grease can
  • Compact heavy gauge chassis for long life
  • Stainless steel sides and front valve cover
  • Double wall panels for cooler sides
  • Aeration panels between the burners for added efficiency
  • Stainless Steel “U” shaped burner every 12”, rated at 30,000 BTU/hr
  • Energy saving thermostat is adjustable from 150º-450º F
  • 1” thick griddle plate with polished cooking surface
  • Thermo control to operate every burner
  • 4” wide S/S grease trough with large drain opening for easy cleaning
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RTG-72
Width 72 in
Cooking depth 24 in
Burners 6
Total input 180,000 BTU/hr
Plate thickness 1 in
Shipping weight 710 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer
Thermostats 6
Temperature range 150–450°F

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RHP-36-6; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RHP-12-1 12″ 1-Burner Gas Hot Plate

Pricing pending

View features, specifications & documents

Royal RHP-12-1 12″ 1-Burner Gas Hot Plate is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 11” high, Low Profile
  • Full width, removable stainless steel crumb pan for easy cleaning
  • Compact heavy gauge chassis for long life
  • Stainless steel sides, front valve cover and ledge for easy cleaning
  • Double wall panels for cooler sides
  • Cast iron burners rated at 30,000 BTU/hr each featuring removable, non-clog lift off heads with flat top design
  • Heavy cast iron 12” x 12” top grates with unique bowl design
  • Protected standing pilots for instant ignition
  • Manual control for each burner
  • Stainless steel tubing for pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RHP-12-1
Width 12 in
Depth 16 in
Burners 1
Total input 30,000 BTU/hr
Shipping weight 60 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RHP-36-6; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RHP-12-2 12″ 2-Burner Gas Hot Plate

Pricing pending

View features, specifications & documents

Royal RHP-12-2 12″ 2-Burner Gas Hot Plate is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Cast iron lift-off burners with manual controls.
  • Protected standing pilots and removable crumb pan.
  • Stainless steel exterior panels.
  • Four-inch adjustable legs included.

Technical Specifications

Brand Royal
Model RHP-12-2
Width 12 in
Depth 30.5 in
Burners 2
Total input 60,000 BTU/hr
Shipping weight 95 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RHP-36-6; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RHP-24-2 24″ 2-Burner Gas Hot Plate

Pricing pending

View features, specifications & documents

Royal RHP-24-2 24″ 2-Burner Gas Hot Plate is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 11” high, Low Profile
  • Full width, removable stainless steel crumb pan for easy cleaning
  • Compact heavy gauge chassis for long life
  • Stainless steel sides, front valve cover and ledge for easy cleaning
  • Double wall panels for cooler sides
  • Cast iron burners rated at 30,000 BTU/hr each featuring removable, non-clog lift off heads with flat top design
  • Heavy cast iron 12” x 12” top grates with unique bowl design
  • Protected standing pilots for instant ignition
  • Manual control for each burner
  • Stainless steel tubing for pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RHP-24-2
Width 24 in
Depth 16 in
Burners 2
Total input 60,000 BTU/hr
Shipping weight 95 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RHP-36-6; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RHP-24-4 24″ 4-Burner Gas Hot Plate

Pricing pending

View features, specifications & documents

Royal RHP-24-4 24″ 4-Burner Gas Hot Plate is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Cast iron lift-off burners with manual controls.
  • Protected standing pilots and removable crumb pan.
  • Stainless steel exterior panels.
  • Four-inch adjustable legs included.

Technical Specifications

Brand Royal
Model RHP-24-4
Width 24 in
Depth 30.5 in
Burners 4
Total input 120,000 BTU/hr
Shipping weight 155 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Manufacturer family photo shows RHP-36-6; dimensions and configuration vary by selected model.

Manufacturer family photo shown; model size and controls vary.

Royal RHP-48-8 48″ 8-Burner Gas Hot Plate

Pricing pending

View features, specifications & documents

Royal RHP-48-8 48″ 8-Burner Gas Hot Plate is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • Cast iron lift-off burners with manual controls.
  • Protected standing pilots and removable crumb pan.
  • Stainless steel exterior panels.
  • Four-inch adjustable legs included.

Technical Specifications

Brand Royal
Model RHP-48-8
Width 48 in
Depth 30.5 in
Burners 8
Total input 240,000 BTU/hr
Shipping weight 280 lb
Gas configuration Natural gas or LP; specify when ordering
Gas connection ¾-inch NPT; supplied regulator installed by installer

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RHP-12-2SU — manufacturer family photo; verify selected configuration

Manufacturer family photo shown; model size and controls vary.

Royal RHP-12-2SU Step Up Hot Plates

Pricing pending

View features, specifications & documents

Royal RHP-12-2SU Step Up Hot Plates is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 11” high, Low Profile
  • Full width, removable stainless steel crumb pan for easy cleaning
  • Rear burners elevated 4”
  • Compact heavy gauge chassis for long life
  • Stainless steel sides, valve cover and plate ledge for easy cleaning
  • Double wall panels for cooler sides
  • 30,000 BTU/hr cast iron burners featuring removable, non-clog lift off heads with flat top design
  • Heavy cast iron 12” x 12” top grates with unique bowl design
  • Protected standing pilots for instant ignition
  • Manual control for each burner
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RHP-12-2SU
BURNERS 2
BTU 60,000
DEPTH 30-1/2″
WIDTH 12″

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RHP-24-4SU — manufacturer family photo; verify selected configuration

Manufacturer family photo shown; model size and controls vary.

Royal RHP-24-4SU Step Up Hot Plates

Pricing pending

View features, specifications & documents

Royal RHP-24-4SU Step Up Hot Plates is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 11” high, Low Profile
  • Full width, removable stainless steel crumb pan for easy cleaning
  • Rear burners elevated 4”
  • Compact heavy gauge chassis for long life
  • Stainless steel sides, valve cover and plate ledge for easy cleaning
  • Double wall panels for cooler sides
  • 30,000 BTU/hr cast iron burners featuring removable, non-clog lift off heads with flat top design
  • Heavy cast iron 12” x 12” top grates with unique bowl design
  • Protected standing pilots for instant ignition
  • Manual control for each burner
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RHP-24-4SU
BURNERS 4
BTU 120,000
DEPTH 30-1/2″
WIDTH 24″

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RHP-36-6SU — manufacturer family photo; verify selected configuration

Manufacturer family photo shown; model size and controls vary.

Royal RHP-36-6SU Step Up Hot Plates

Pricing pending

View features, specifications & documents

Royal RHP-36-6SU Step Up Hot Plates is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 11” high, Low Profile
  • Full width, removable stainless steel crumb pan for easy cleaning
  • Rear burners elevated 4”
  • Compact heavy gauge chassis for long life
  • Stainless steel sides, valve cover and plate ledge for easy cleaning
  • Double wall panels for cooler sides
  • 30,000 BTU/hr cast iron burners featuring removable, non-clog lift off heads with flat top design
  • Heavy cast iron 12” x 12” top grates with unique bowl design
  • Protected standing pilots for instant ignition
  • Manual control for each burner
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RHP-36-6SU
BURNERS 6
BTU 180,000
DEPTH 30-1/2″
WIDTH 36″

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RECO-2 — manufacturer family photo; configuration varies

Manufacturer family photo shown; configuration and controls vary by model.

Royal RECO-2 Double-Deck Electric Convection Oven

Pricing pending

View features, specifications & documents

Royal RECO-2 Double-Deck Electric Convection Oven is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • All stainless steel front, sides, and top construction
  • 3 heating elements for a total of 9 KW power (RECO Models Only)
  • Electric thermostat adjustable from 150° to 500° F
  • Oven interior is porcelain coated for easy cleaning
  • 5 chrome-plated racks standard with 11 positions
  • Two speed motor

Technical Specifications

Brand Royal
Model RECO-2
Configuration 2 decks; standard depth
Power 18 kW
Width 34 in
Depth 40½ in
Usable interior per oven (W × D × H) 29 × 22½ × 24 in
Shipping weight 940 lb
Voltage / phase 208 or 240 V, single or three phase; 480 V three phase optional.
Temperature range 150–500°F

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Manufacturer family photo shown. Size, number of decks, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RCOS-2 — manufacturer family photo; configuration varies

Manufacturer family photo shown; configuration and controls vary by model.

Royal RCOS-2 Double-Deck Gas Convection Oven

Pricing pending

View features, specifications & documents

Royal RCOS-2 Double-Deck Gas Convection Oven is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • All stainless steel front, sides and top construction
  • Two stainless steel, 35,000 BTU/hr. burners
  • Electronic ignition with 100% safety
  • Electric thermostat adjustable from 150° -500° F
  • Oven interior is porcelain coated for easy cleaning
  • 5 chrome-plated racks standard with 11 positions
  • Two speed motor

Technical Specifications

Brand Royal
Model RCOS-2
Configuration Double deck; standard depth
Burners 4
Total input 140,000 BTU/hr
Width 38 in
Depth 40½ in
Usable interior per oven (W × D × H) 29 × 22½ × 24 in
Shipping weight 1,005 lb
Electrical requirements 120 VAC / 50–60 Hz / 1 phase; confirm total connection requirements for double-deck installation.
Temperature range 150–500°F
Gas configuration Natural gas or LP; specify when ordering
Electrical supply 120VAC, 50–60 Hz, 1 phase, 8 A; see installation guide

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Size, number of decks, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RHEF-45-DM — manufacturer family photo; configuration varies

Manufacturer family photo shown; configuration and controls vary by model.

Royal RHEF-45-DM 45–50 lb High-Efficiency Gas Fryer

Pricing pending

View features, specifications & documents

Royal RHEF-45-DM 45–50 lb High-Efficiency Gas Fryer is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 63% Energy Efficiency
  • “Zero” Recovery time
  • 71 lbs. Per hour production capacity
  • 45-50 lb capacity stainless steel tank assembly
  • All stainless steel cabinet
  • Innovative heat exchanger assembly transfers maximum heat to the oil
  • 3 tube heat entry with easily removable diffusers reduces thermal stress
  • Automatic pilot ignition with 100% safety
  • High efficiency in-shot burners rated at 33,000 BTU/hr each
  • Extremely low exhaust flue temperatures
  • Twin fry baskets with plastic coated handles for ease of handling
  • 1¼” full port drain valve
  • 6” heavy duty adjustable legs
  • Ten year limited (prorated) warranty on S/S tank

Technical Specifications

Brand Royal
Model RHEF-45-DM
Control Digital solid-state thermostat
Oil capacity 45–50 lb per current spec sheet
Burners 3
Total input 99,000 BTU/hr
Cooking area 13½ × 14⅜ in
Shipping weight 240 lb
Electrical requirements 120 V / 60 Hz / 1 phase / 2 A
Gas configuration Natural gas or LP; specify when ordering
Tank warranty 10-year limited prorated; terms apply

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts and labor coverage, subject to the manufacturer’s installation, service and exclusion requirements. Stainless steel fry tank: ten years, prorated. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Size, number of decks, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RHEF-45-DM2 — manufacturer family photo; configuration varies

Manufacturer family photo shown; configuration and controls vary by model.

Royal RHEF-45-DM2 45–50 lb High-Efficiency Gas Fryer

Pricing pending

View features, specifications & documents

Royal RHEF-45-DM2 45–50 lb High-Efficiency Gas Fryer is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 63% Energy Efficiency
  • “Zero” Recovery time
  • 71 lbs. Per hour production capacity
  • 45-50 lb capacity stainless steel tank assembly
  • All stainless steel cabinet
  • Innovative heat exchanger assembly transfers maximum heat to the oil
  • 3 tube heat entry with easily removable diffusers reduces thermal stress
  • Automatic pilot ignition with 100% safety
  • High efficiency in-shot burners rated at 33,000 BTU/hr each
  • Extremely low exhaust flue temperatures
  • Twin fry baskets with plastic coated handles for ease of handling
  • 1¼” full port drain valve
  • 6” heavy duty adjustable legs
  • Ten year limited (prorated) warranty on S/S tank

Technical Specifications

Brand Royal
Model RHEF-45-DM2
Control Two-channel digital control with melt cycle
Oil capacity 45–50 lb per current spec sheet
Burners 3
Total input 99,000 BTU/hr
Cooking area 13½ × 14⅜ in
Shipping weight 240 lb
Electrical requirements 120 V / 60 Hz / 1 phase / 2 A
Gas configuration Natural gas or LP; specify when ordering
Tank warranty 10-year limited prorated; terms apply

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts and labor coverage, subject to the manufacturer’s installation, service and exclusion requirements. Stainless steel fry tank: ten years, prorated. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Size, number of decks, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RHP-48-8SU — manufacturer family photo; verify selected configuration

Manufacturer family photo shown; configuration and controls vary by model.

Royal RHP-48-8SU Step Up Hot Plates

Pricing pending

View features, specifications & documents

Royal RHP-48-8SU Step Up Hot Plates is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • 11” high, Low Profile
  • Full width, removable stainless steel crumb pan for easy cleaning
  • Rear burners elevated 4”
  • Compact heavy gauge chassis for long life
  • Stainless steel sides, valve cover and plate ledge for easy cleaning
  • Double wall panels for cooler sides
  • 30,000 BTU/hr cast iron burners featuring removable, non-clog lift off heads with flat top design
  • Heavy cast iron 12” x 12” top grates with unique bowl design
  • Protected standing pilots for instant ignition
  • Manual control for each burner
  • Stainless steel tubing for burners and pilots
  • 4” high adjustable heavy duty legs included

Technical Specifications

Brand Royal
Model RHP-48-8SU
BURNERS 8
BTU 240,000
DEPTH 30-1/2″
WIDTH 48″

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts coverage and one year of labor coverage; the second year covers parts only. Coverage is subject to the manufacturer’s installation, service and exclusion requirements. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.

Royal RHEF-75-EM — manufacturer family photo; configuration varies

Manufacturer family photo shown; configuration and controls vary by model.

Royal RHEF-75-EM 75 lb High-Efficiency Gas Fryer

Pricing pending

View features, specifications & documents

Royal RHEF-75-EM 75 lb High-Efficiency Gas Fryer is part of Royal’s commercial cooking equipment line. Review the model specifications and installation documents below to select equipment for your kitchen.

Equipment Features

  • All stainless steel cabinet
  • High quality heavy gauge stainless steel tank
  • Innovative heat exchanger assembly transfers maximum heat to the oil
  • High efficiency in-shot burners rated at 33,000 BTU/hr each
  • Automatic pilot ignition with 100% safety
  • Extremely low exhaust flue temperatures
  • 1-1/4″ full port drain valve

Technical Specifications

Brand Royal
Model RHEF-75-EM
COOKING AREA 17 1/2″ x 18″
BURNERS 4
TOTAL BTU 132,000

Tech Specs & Guides

Manufacturer Warranty

Royal limited warranty: two years of parts and labor coverage, subject to the manufacturer’s installation, service and exclusion requirements. Stainless steel fry tank: ten years, prorated. Coverage starts at original installation, with manufacturer date limits. Wear parts, installation, adjustments and travel beyond the covered service radius are excluded.

Ordering & Installation

Confirm gas type or electrical supply, installation elevation, clearances and selected options with RDS before ordering. Optional equipment pictured is included only when specified. Professional installation must follow the attached manufacturer instructions.

Manufacturer family photo shown. Width, burner layout, controls and optional accessories vary by selected model; use the model specifications when ordering.